Sun-microsystems Sun Fire X4200 M2 Bedienungsanleitung PDF herunterladen (Seite 24)

16 Sun Fire X4100 and Sun Fire X4200 Installation Guide • October 2006

Powering On Main Power Mode

● To power on main power for all server components:

a. Verify that power cords have been connected and that standby power is on.

In standby power mode, the Power/OK LED on the front panel flashes. See

FIGURE 1-13 or FIGURE 1-14.

b. Use a ballpoint pen or other stylus to press and release the recessed Power

button on the server front panel.

When main power is applied to the full server, the Power/OK LED next to the

Power button lights and remains lit.

FIGURE 1-13 Sun Fire X4100/X4100 M2 Server Front Panel

FIGURE 1-14 Sun Fire X4200/X4200 M2 Server Front Panel

Shutting Down Main Power Mode

● To power off the server from main power mode, use one of the following two

methods:

■ Graceful shutdown: Use a ballpoint pen or other stylus to press and release the

Power button on the front panel. This causes Advanced Configuration and Power

Interface (ACPI) enabled operating systems to perform an orderly shutdown of

the operating system. Servers not running ACPI-enabled operating systems will

shut down to standby power mode immediately.

Power buttonPower/OK LED

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 49 50

Keine Kommentare

Sun-microsystems Sun Fire X4200 M2 Bedienungsanleitung Seite 24