Sun-microsystems StorEdge 6900 Series Bedienungsanleitung PDF herunterladen (Seite 135)

Chapter 8 Troubleshooting the Sun StorEdge T3+ Array Devices 119

For Internal Use Only

t3 controller State

Change-

Red Y [ Info/Action ]

controller.u1ctr

in T3 diag213

(ip=xxx.20.67.213)

is now Not-Available

(status-state changed

from unknown to

ready-disabled)

Information: The Sun

StorEdge T3+ array

controller has been

disabled.

Recommended action:

1. Telnet to affected

Sun StorEdge T3+

array.

2. Verify the

controller state

with ‘fru stat’ and

‘sys stat’.

3. Run ‘logger -

dmprstlog’ to

capture controller

information.

4. Re-enable the

controller if

possible (enable u)

5. Replace the

controller, if

necessary.

t3 disk StateChange- Red Y [

Info/Action ]

disk.u1d5 in T3

rasd3-t3b1

(ip=xxx.0.0.41)is

now Not-Available

(status-state changed

from unknown to

fault-disabled).

Information: The Sun

StorEdge T3+ array

has reported that a

disk has failed.

Recommended action:

1. Telnet to the

affected Sun

StorEdge T3+ array

2. Verify that the disk

state is in fru

stat, fru list,

and vol stat.

3. Replace the disk, if

necessary.

Category Component EventType Sev Action Description Information

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 161 162

Kommentare zu diesen Handbüchern

Keine Kommentare

Sun-microsystems StorEdge 6900 Series Bedienungsanleitung Seite 135

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Sun-microsystems StorEdge 6900 Series