Sun-microsystems SunFastEthernet Adapte Bedienungsanleitung PDF herunterladen (Seite 57)

NetworkLinkups/Speed Selection 5-3

5.2 SpeedSelection

If you receive the following messages after connecting to a 10 or 100Mbps

network then more than likely the external hub and the SunFastEthernet are

out of sync. In these instances speed selection may be done manually using the

be_speed utility as indicated in the procedure that follows:

This utility is available in the directory /usr/sbin only if patch ID 101820-01 is

installed. This patch is mandatory for the Solaris 2.3 Hardware: 5/94 release;

for the Solaris 2.x Hardware: 8/94 release the patch is needed only if the

be_speed utility is required.

To use the utility for Solaris 1.x, type the following at the prompt:

To use the utility for Solaris 2.x, type the following at the prompt:

Wherein <num> is the SunFastEthernet Adapter card number and the

arguments are:

• auto (automatic speed selection)

• 100 (forces 100 Mbps mode)

• 10 (forces 10 Mbps mode)

If no arguments are selected then the current mode (auto or forced) and speed

(10 or 100Mbps) of the interface will be printed.

# be<num>: 100 Mbps Link Up

Link Down

10 Mbps Link Up

Link Down

# /usr/bin/be_speed be<num> <arguments>

# /usr/sbin/be_speed be<num> <arguments>

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 87 88

Keine Kommentare

Sun-microsystems SunFastEthernet Adapte Bedienungsanleitung Seite 57